Wheel spindles: £50
15mm or 17mm diameter, with threaded nut. Anodised 2014A aluminium. INCLUDES: Universal spacer kit (3-15mm) to fit virtually all hub widths
Besides the Options listed, we offer a full spares back-up of quality seals, wipers, bushes, springs etc
Please note: our spares will NOT fit old/original REH forks as the internal design has been upgraded
REH Gaiters: £20 / pair
Supple compression to maximise fork travel. Internal reinforcement gives smooth, linear compression with minimal bulk.
From Armac Design, anodised grey, lightweight, waterjet-cut from T6 6082 aluminium.Fits any 24mm nut - including Armac Design rear wheel spindle nut + any 13mm nut - including security bolt nut + Armac Design yoke spindle nut
Fork leg guards:
£25 carbon fibre effect
Custom-moulded thermo-plastic guards to protect your fork legs. Scratch a pair of these, not your irreplaceable sliders. Zip-tie into place for easy cleaning/replacement (zip-ties included).
Mudguard brace assembly: £25
Laser-cut in aluminium and hydraulic-pressed in a custom tool to match our front mudguard. Fits neatly under the mudguard. Adds to rigidity of the fork. Designed to work with Mudguard Clamps and REH Front Mudguard. Now available in 2 sizes
Standard: fits forks with stanchions 160-165mm centre to centre (+/-2mm).
Wide: fits forks with stanchions 165-170mm (+/-2mm) centre to centre.
CLAMP A: with front brake cable anchor
CLAMP B: without front brake cable anchor
Designed to work with Mudguard Brace Assembly. Pinchbolts included.
Set 1: £55 (1 of each)
Set 2: £50 (2 x Clamp B)
Makes front brake cable as short as possible (long cables suffer more compression in outer spiral housing, causing sponginess in brake action). Brackets clamp around seal housing to enable adjustment of mudguard/tyre clearance. Inside diameter: 56mm
REH Front Mudguard: £25
White plastic, fits REH Mudguard Brace Assembly.
Spare springs: £25 each
Tailor fork action to sections.
Soft, Medium, Hard
OD: max 28mm
REH SPARES for wearing parts
Seal Set: £28 (2 x oil seals, 2 x dust seals)
Bushes Set: £32 (2 x internal, 2 x external bushes)
Wear Rings Set: £12 (2 x PTFE wear rings)
Putoline Suspension Oil £11
HPX Special Racing Suspension Fluid from Putoline, 7.5W or 10W, in 1 litre bottles. We supply 7.5W or 10W with new forks, this should be changed after your first 2-3 trials. 1 litre will do 2 complete changes (220cc of oil per leg, per change). Adjust the damping, by changing the oil weight; details on our Service Sheet
TO ORDER: Email: email@example.com
Call us on: 01751 417371 or 07876 433582
DELIVERY COSTS (UK)
Forks + any Options: £20 (UPS next day)
Large Options: £15 (UPS next day): eg Mudguards, Springs, Yokes
Small Options as single items: £6.50 first class recorded, £10 special delivery post (weight less than 2kg, in a compact package),
eg Spindle, Mudguard Brace Assembly, Brace Clamps, Spanner, Brake Anchor Plate, spare seals/bushes etc
* Please contact us to check that your order fits the Small Options sizings
Brake anchor plate: £23
Engineered for REH Forks, for Tiger Cub replica hubs. Reversible, allowing 2 positions for different length brake arms. Works with REH Brace Clamp Set 1 (with cable anchor), for correct cable alignment.
Supplied with bolt, nut and washers.
6mm aluminium, waterjet cut and vibro-finished.
Left: pictured on hub
Right: kit as supplied
Hinged brake anchor bracket: £50
NEW: A hinged, three-part component in machined aircraft grade 7075 aluminium. This clamps to the slider to enable a brake anchor arm or strap to be bolted between it and the brake plate. Supplied with Loctite (5ml).
New: Wheel spindles in EN16T: £65
Indestructible steel spindles, moto-x spec, in 15mm or 17mm diameter, with threaded nut (2014A aluminium, black anodised). Ideal for bigger bikes: approx 225g heavier than aluminium version and super-strong.
INCLUDES: Universal spacer kit (3-15mm) to fit virtually all hub widths