
Classic off-road competition forks
Custom-built in Yorkshire
FORK LEG GUARDS
£30 (£25 + VAT)
* Custom-moulded guards to protect fork legs
* Tough, high-density 3mm polypropylene
* Zip-tie into place (zip ties included) for easy cleaning and replacement
* Made in Macclesfield
SPARE SPRINGS £34.80 each (£29 + VAT)
Tailor fork action to weight/riding styles and terrain
Soft, Medium Hard
Length: 430mm
OD: max 28mm
ID: 19mm
HINGED BRAKE ANCHOR BRACKET
£72 (£60 +VAT)
* Hinged 3-part component in 7075 aluminium
* Clamps to slider, brake anchor arm or strap bolts between hinged bracket + brake plate
* Supplied with Loctite

FRONT WHEEL SPINDLE £60 (£50 +VAT)
* Anodised 2014A aluminium
* 15mm or 17mm diameter
* Includes Spacer Set (3,5,7mm, total 3-15mm in combination) to suit virtually all hub types
* For very heavy combinations, consider MX Spindle in EN16T, £66

MUDGUARD BRACE ASSEMBLY £30 (£25 +VAT)
* Laser cut in aluminium, hydraulic pressed to match R.E.H Front Mudguard
* Fits neatly under mudguard
* Adds to rigidity of fork
* Pairs with Brace Clamps
2 sizes (Standard for R.E.H 3D Trials Yokes)
* Standard: fork stanchions 160-165mm centre to centre (+/-2mm)
* Wide: fork stanchions 165-170mm (+/-2mm)

BRACE CLAMPS £69.60/ £63.60 (£58 / £53 +VAT)
* Brackets clamp around seal housing
* Pairs with Mudguard Brace Assembly
* Pinchbolts included
* I.D 56mm
* Makes front brake cable as short as possible. Reduces compression in outer spiral housing which causes spongy brake action
* Set 1 (1 with brake cable lug, 1 plain) £69.60
* Set 2 (2 plain clamps, left in picture) £63.60

FRONT MUDGUARD £30 (£25 + VAT)
* Exact fit with Mudguard Brace Assembly



BRAKE ANCHOR ARM £24 (£20 + VAT)
* Use with hinged brake anchor bracket
* For hubs with brake plates that need a brake arm, not a brake lug
* Waterjet from 6082 6mm aluminium plate

BRAKE ANCHOR PLATE £30 (£25 + VAT)
* Engineered for R.E.H Forks with Tiger Cub replica hubs (pic 2 shows fitted to hub)
* Reversible, allows 2 positions for brake arms
* Pairs with Brace Clamps set 1 for correct cable alignment
* 6mm aluminium, water jet cut, vibro finish
* Supplied with bolt, nut, washers
PLEASE FIT AS SHOWN, WITH 2 BOLTS


GAITERS £30 (£25 + VAT)
* Protect your stanchions from surface damage
* Internal reinforcement gives smooth, linear, low-bulk compression

R.E.H SPARES FOR WEARING PARTS
Note: These will NOT fit original REH Forks
* Seal Set (2x dust seals, 2x oil seals) £33.60 (£28 + VAT)
* Bushes Set (2x internal,. 2x external bushes) £38.40 (£32 + VAT)
* Wear Rings Set (2xPTFE wear rings) £15 (£12.50 + VAT)
See also: SERVICING + STANCHIONS
VRS SYSTEM £72 (£60 +VAT)
* Variable Rate Spring System
(patent pending)
*3 lengths (to work with R.E.H
fork leg lengths 30"/31"/32")

TO ORDER or discuss your build: Call us : 01751 417371 or Email us: rehforks@gmail.com
We ALWAYS carry stock, and build to your order. A proforma invoice will be emailed, for payment by bank transfer or cheque
Forks are despatched within 5 working days of payment, by next-day courier